5FT Bypass Sliding Barn Wood Door Track Kit Stainless Steel Bypass Top Mount Door Kit. Hardware Only, Not including Door Panel. Suitable for door panel thickness:1 3/8"1 3/4";Highly suggest use thick(1 3/4) door panel to reduce the gap between 2 door panel.
Each 2 rollers can hold 1 door MAX weight 90kgs. Door panel can slide to the right and left sides freely. The height from top of the door to the top of the bypass bracket is 5 2/5. Roller plate's width that set on the top of the door's is about 1 1/4", so the hardware suitable for door thickness :1 1/4"2. The gap between 2 door panel / door&wall is about 1" based on door thickness 1 3/4".
Highly suggest to use thickness: 1 3/4"2"'s door panel to reduce the gap. Anti-jump's location is very close to the tube, it can prevent roller jump off the tube. Door panel need to be cut a groove ti install floor mount guide.
The floor guide plus 2 rollers one the top will become a triangle to keep door panel straight.