DIY CNC Engraver Kits Wood Carving 1m1m Cutter Machine with 40W Laser Module

Added chain, no need to worry about cable when engraving. The maximum engraving an area to achieve 100 100CM. It can adjust laser power by software. 100100 ultra large engraving area, gantry shape design, no engraving height limitation.

Three stepper motor drive providing faster moving speed. Engraving power and long-term available. Can print any pictures easily. The software can directly import pictures, enter text, support simple dxf file. This machine is a full set of parts, required installed on their own, giving the purchaser to install software and tutorials.

Engrave Mode:Photo, Word, Scan, outline, Pixel Laser Engraving. Supported Formats:jpg, bmp, svg, G-code. Material:Stainless Steel and Acrylic. Laser Power:15W/30W/40W(Fixed Focus).

Control Software System :CNC software. Engraving Area:100x100cm / 39.37 x 39.37inch (maximum).

Laser:40w Optical Power Output:5.5w Current:1.8A Laser Tube: LD FAC C-Lens Laser Wavelength: 445nm±5nm Beam Shape:Dot (Fixed Focus) Operating Voltage:DC 12v Module Size:40mm X 40mm X 152mm Cooling Mode:12v 10000 Rpm 40mm Cooling Fan Focus:0.080.08 PWM/TTL Input:0-5v Input Interface:xh2.54-3pin (+, -, Pwm/ttl) TTL Output Power:> 1k Hz Output Power = Continuous Power X 40% Working Frequency. Way1: With The Air Asssit Nozzle The laser head comes with a specially designed air assist nozzle. When cutting with this laser head, the air assit system will blow air through the air nozzle. That will bring you excellent cutting experience and greatly reduce burned marks.

To make full use of the air assist, please prepare an assist pump and air tubing by yourself. Way 2: With The Laser Protective Cover When engraving with this laser head, please use this protective cover that can effectively filter blue light. You can peform engraving without wearing laser goggles for convenience. 40W Laser Actual Output Power Test.

---